RJ12 Extension Cable Set - ECS-1 TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with... $24.40
RJ12 Splitter Hub - SPH-1 The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various... $40.26
Dry Contact Station -- DSD-1 The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or... $96.38
CO2 Device Station --DSC-1 The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1... $85.40
CO2 Emergency Stop Station - DSE-1 The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal operation . The... $126.88
CO2 Alarm Station - AS-4 The AS-4 CO2 Alarm Station with an Blue light alarm module comes with a Blue light LED display indicator and a LCD digital ppm level reading. It is designed to be mounted outside of the space to be monitored, and will display the CO2 ppm level. The AC-4... $254.98
CO2 Alarm Station (Amber light) - AS-3 The AS-3 CO2 Alarm Station with an Amber light alarm module comes with a Amber light LED display indicator and a LCD digital ppm level reading. It is designed to be mounted outside of the space to be monitored, and will display the CO2 ppm level. The... $254.98
CO2 Alarm Station (audio/visual) - AS-2 The AS-2 CO2 Alarm Station combines an audio-visual alarm module with a color-coded LED display indicator and a LCD digital ppm level reading. It is designed to be mounted outside of the space to be monitored, and will display the CO2 ppm level. The AS-2... $254.98
CO2 Alarm Station (audio/visual) with cable set - AS-1 The AS-1 CO2 Alarm Station is an audio/visual alarm to be mounted inside or outside the room to be monitored, and sound an alarm (both visible and audible) in the event of the CO2 level going above normal or safe levels. It can be linked to either low or... $152.50
CO2 sensor for Carbon-X - MBS-K30 The ability to read up to 30,000 ppm CO2 is critical to the proper operation and safety of an emergency CO2 system like the Carbon-X. The MBS-K30 is Trolmaster’s newest CO2 sensor, which incorporates a NDIR 0-30,000 ppm sensor in a self-aspirated... $447.74
Carbon-X CO2 Alarm System - CDA-1 The TrolMaster Carbon-X system provides critical monitoring of CO2 levels for up to 13 separate zones / rooms. The system can have both high level (up to 30,000ppm) alerts, as well as low level (5,000ppm) alerts. Both high and low level limits are... $639.28
16ft Extension Cable for Sensor Board - ECS-4 The ECS-4 Extension Cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller. Features: Seamless Connection ... $25.62
Touch Spot Extension Cable - TSS-2 The TSS-2 Extension Cable is simply a 16 ft extension cable to use with the WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or distance between WD-1 module and the sensor). Features: ... $20.13
Touch Spot Set - TSS-1 Additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. It comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module. This... $40.26
Water Content Sensor - WCS-1 The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture level / water content is displayed in real-time on the WCS module itself, the Aqua-x and the APP. That data is displayed on a... $280.60
Water Detector - WD-1 The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or a space for water… as a leak-detector. The other way the WC-1 can be used is as a water-verification monitor. When used in this way, the... $89.67
Inline pH Sensor - PPH-2 The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to be installed into... $229.36
Inline EC/Temp Sensor - PCT-2 The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is... $254.98
Reservoir pH Sensor - PPH-1 The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-1 probe connects to the Aqua-x via the AMP-2. *All pH probes must be stored by using the storage cap and the correct... $102.48
Reservoir EC/Temp Sensor - PCT-1 The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-1 probe connects to the Aqua-x via the AMP-2. Features: ... $116.51