Temp/Humid/CO2/Light 4-in-1 Sensor for Hydro-X Pro - MBS-PRO

The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for both Hydro-X Pro and Hydro-X Plus systems.

Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device.

The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.

Please Note: The MBS-Pro requires the SPH-1 for supplemental power.

"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

Features:

• Plug & Play

• Build-in LCD for onsite monitoring

Package Contents:

• 1x MBS-Pro Sensor

Specifications:

• Input Voltage: 0~11.5V

• Maximum Current: 0.2A

• Working Environment: Temperature 32-122°F, Humidity=90%

• Package Dimensions(L*W*H): 275mm X 164mm X 62mm