Program Device Station --DSP-1

The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

Features:

• LED Power Indicator

• 3-Prong Attaching Plug

• RJ12 Cable Socket

• Addressing

• Plug & Play 

Package Contents:

• 1 x Device Station

• 1 x 16ft RJ12 Cable

• 1 x 4ft RJ12 Cable

• 1 x RJ12 T-Splitter

Specifications:

• Input Voltage: 100~240 VAC, 50/60Hz

• Output Current: 10A

   

• Output Voltage: 100~240 VAC, 50/60Hz

• Working Environments: Temperature 32-122°F, Humidity=90%

• Package Dimensions:  85mm(L) x 80mm(W) x 90mm(H)

• G.W. per pack: 0.34kgs