240V Program Device Station - DSP-2

The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.

LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

Features:

•  LED Power Indicator

   

• RJ12 Cable Socket

   

• Addressing

   

• Plug & Play

Package Contents:

•  1 x Device Station

   

• 1 x 16ft RJ12 Cable

   

• 1 x 4ft RJ12 Cable

   

• 1 x RJ12 T-Splitter

Specifications:

• Input Voltage: 100~240 VAC, 50/60Hz

• Output Current: 10A

• Output Voltage: 100~240 VAC, 50/60Hz

• Working Environments: Temperature 32-122°F, Humidity=90%

• Package Dimensions: 85mm(L) x 80mm(W) x 90mm(H)

• G.W. per pack: 0.34kgs